Views: 0 Author: Site Editor Publish Time: 2024-05-16 Origin: Site
An Acoustic Wall is usually made of sound-absorbing material on one side and sound-insulating and reflective material on the other side. Its function is to reduce the crosstalk of each sound source in the recording room or to adjust the sound quality of the sound source by using the different sound absorption characteristics of the two sides of the wall panel. Let's take a look at the relevant information on the Acoustic Wall.
Acoustic Wall elastic line positioning: According to the construction drawing, release the position control line of the movable partition wall on the indoor floor, and lead the partition wall position line to the side wall and the top plate. The snap line is the installation location line where the fastener should pop out.
Installation of Acoustic Wall track fixings: Select track fixings according to design requirements. Before installing the track, consider the closing method of the wall, ground, and ceiling and facilitate the installation of the movable partition wall. By calculating the weight of the movable partition wall, determine the load on the track and the specifications and fixing methods of the embedded parts. The embedded parts of the track should be installed firmly, the track and the main structure should be firmly fixed, and all metal parts should be treated with anti-rust treatment.
Acoustic Wall prefabricated partition fan: First, determine the net size of the movable partition wall according to the design drawings combined with the size measured on site. Then, according to the installation method of the track, the net size of the movable partition wall and the design grid requirements, the size of each partition fan of the movable partition wall is calculated and determined, and finally, a large sample drawing is drawn and commissioned for processing. Since the movable partition wall is a movable wall, it is required that each partition should be as beautiful and fine as a decorative door. It should be prefabricated by a professional manufacturer, and the quality of the product should be guaranteed through processing and trial assembly.
Sponge. The sponge is a sound-absorbing material with very good performance. Usually, a large number of sponges are used in recording studios to achieve sound insulation. The sound-absorbing effect of sponges with sound-absorbing grooves on the surface is better.
Polyurethane foam. Polyurethane foam is the main component of styrofoam. The cured polyurethane foam can have good sound insulation and sound absorption properties, as well as anti-corrosion and waterproof, and the better polyurethane material has a flame-retardant design, which is the best choice for Acoustic Wall materials choose.
Calm sound insulation and sound-absorbing cotton. Calm sound insulation and sound-absorbing cotton takes industrial rubber and plastic as the carrier, add various specifications of sound insulation particles, and nitrogen foaming, and have a gray-black appearance. Its front is covered by micro sound-absorbing holes and special-shaped sound-absorbing grooves, which can efficiently filter the noise of different frequencies and wavelengths, integrate sound insulation and attraction functions and meet the requirements of lightweight and environmental protection for home improvement sound insulation materials, and the cost performance is very high.
Sound insulation damping felt. The sound insulation damping felt is made of various organic minerals in a certain proportion by introducing foreign advanced technology. The sound insulation felt has good wide-band sound insulation performance and high damping performance.
Sound insulation blanket. Professional sound insulation material, this material has excellent broadband sound insulation properties and high damping properties, and can effectively isolate various types of airborne sound. It is combined with gypsum board and sound-absorbing cotton to form a sound insulation wall. The sound insulation effect is very good. For wall decoration, it is best to make the wall a little bumpy, such as using wallpaper, wall coverings, and other materials to do some decoration, they have a very good noise reduction effect.
The hydropower major must cooperate closely with the installation of the partition. The laying of water and electricity-buried pipes should be carried out simultaneously with the installation of light wall panels.
When the Acoustic Wall board needs to be opened, the hole should be cut with a special electric machine within 7 days after the strip is installed, and the size of the hole should not be larger than 80*80mm. The hole should be square, and the inside of the hole should be cleaned before installation. Repairs around the hole are filled with polymer adhesive mortar. Horizontal slotting is strictly prohibited.
The opening of the Acoustic Wall is on the side of the door and window, and the inner hole of the partition wall needs to be filled with fine stone concrete.
The width of the seam on the control board is 5mm.
The above is the relevant information about Acoustic Wall. If you are interested in Acoustic Wall, you can contact us. Our website is https://www.yhacoustic.com/. We are looking forward to your arrival and hope to be able to communicate with you Cooperation.
